Thiết bị đo lường – Mỹ Việt https://myviet-idi.com/vi/ MyViet IDI Corporation Wed, 14 Aug 2024 05:50:59 +0000 vi-VN hourly 1 https://myviet-idi.com/storage/2024/05/cropped-favicon-32x32.png Thiết bị đo lường – Mỹ Việt https://myviet-idi.com/vi/ 32 32 Hướng dẫn thay bạc than RX Rotary Union https://myviet-idi.com/vi/products/huong-dan-thay-bac-than-rx-rotary-union/ Wed, 14 Aug 2024 05:50:59 +0000 https://myvietidi.ura.vn/products/huong-dan-thay-bac-than-rx-rotary-union/

 

]]> Hướng dẫn thay bạc than 9750 PTX Rotary Joint https://myviet-idi.com/vi/products/huong-dan-thay-bac-than-9750-ptx-rotary-joint/ Wed, 14 Aug 2024 05:49:11 +0000 https://myvietidi.ura.vn/products/huong-dan-thay-bac-than-9750-ptx-rotary-joint/

 

]]> Hướng dẫn lắp đặt giàn phá màng nước ngưng trong lô sấy https://myviet-idi.com/vi/products/huong-dan-lap-dat-gian-pha-mang-nuoc-ngung-trong-lo-say/ Wed, 14 Aug 2024 05:47:17 +0000 https://myvietidi.ura.vn/products/huong-dan-lap-dat-gian-pha-mang-nuoc-ngung-trong-lo-say/

 

]]> Hướng dẫn lắp đặt Rotary Joint 9750 PTX https://myviet-idi.com/vi/products/huong-dan-lap-dat-rotary-joint-9750-ptx/ Wed, 14 Aug 2024 05:33:33 +0000 https://myvietidi.ura.vn/products/huong-dan-lap-dat-rotary-joint-9750-ptx/

 

]]> Khớp nối quay là gì? Sự khác nhau giữa các loại khớp nối quay? https://myviet-idi.com/vi/products/khop-noi-quay-la-gi-su-khac-nhau-giua-cac-loai-khop-noi-quay/ Thu, 25 Jul 2024 03:17:57 +0000 https://myvietidi.ura.vn/products/khop-noi-quay-la-gi-su-khac-nhau-giua-cac-loai-khop-noi-quay/

 

]]> Rotary Scoop Syphon https://myviet-idi.com/vi/products/rotary-scoop-syphon/ Tue, 28 May 2024 15:37:03 +0000 https://myvietidi.ura.vn/products/rotary-scoop-syphon/ Designed specifically for non-rimming cylinders, the Kadant Johnson rotary scoop syphon is pre-assembled at the factory for fast and easy installation. Its stainless steel components provide maximum corrosion resistance and offer reliable condensate evacuation for machine speeds up to 275 mpm (900 fpm).

Features

  • Stainless steel scoop
  • Low clearance syphon gap
  • No grinding of scoop required
  • Syphon pipe exits back of scoop.
  • Stainless steel piping
  • Reduced weight
  • Pipe connection is 1″ DIN and ASA flanged.
  • Heavy section walls
  • Syphon can be bolted directly to the shell or held by a spring loaded leg.
  • Stainless steel spring
  • Range of dryer diameters are 1.2 m to 1.5 m (48″ to 60″).
  • Low puddle depth due to large capacity design
  • Internal spider not required

Benefits

  • Corrosion and erosion resistance, long operating life
  • Minimizes blow through
  • Optimal condensate evacuation with standard offering for common size dryer
  • Lower flow resistance
  • Easier installation
  • Standard flange, stable mounting, easy installation
  • Improved durability
  • Mounting flexibility
  • Fits standard size dryer cylinders (can be ground to fit smaller diameter dryers)
  • Reduced operating torque, reduced stresses on syphon
  • Scoop is placed close to dryer head.

Installation

A manhole opening is required to install the unit. Installation is simple, and requires approximately 20-30 minutes per cylinder with the spring-loaded mounting.

Position the assembled syphon unit vertically at the approximate final location inside the dryer with the pick up shoe at the bottom (six-o-clock position). The flanged outlet of the elbow fitting should face the condensate outlet end of the dryer (toward the journal). Place the flanged horizontal pipe inside the dryer. Insert the plain end through the journal and connect the flanged end to the scoop syphon flanged connection.

Check the location of the syphon, making sure that the horizontal pipe extends through the journal the proper distance for the rotary joint installation.

Turn the hex nut to compress the coil spring and to move the counter weight (similar to the pressure plate) up and into contact with the upper part of the dryer shell. Continue to turn the nut until it has reached the weld stop. Tighten the lock nut against the hex nut. The installation is complete.

]]> Khớp nối quay RX™ https://myviet-idi.com/vi/products/khop-noi-quay-rx/ Tue, 28 May 2024 15:01:16 +0000 https://myvietidi.ura.vn/products/khop-noi-quay-rx/ The RX rotary joint uses a balanced seal with special ball bearing or optional tapered roller bearings to support the rotor. This rotary joint from Kadant Johnson incorporates the latest technology in mechanical seal design for water and hot oil service. The high thrust load capability and carbon-to-silicon (or Tungsten) carbide seal package makes the RX run longer and with less maintenance requirements that other ball bearing designs. All O-rings are fully captured in glands and seal-loading springs do not contact the process fluid. The RX features a barrier in the seal chamber to extend bearing life and a nipple and assembly plate made of stainless steel. Available in single- and dual-flow configurations and sizes from 3/8” to 6”, the RX rotary joint is capable of operating up to 500° F (260° C), 150 psig (10 bar), and 750 RPM.

Features

  • Springs located outside the flow area
  • Stainless steel rotor
  • Two-piece housing, on-machine seal replacement
  • O-rings fully captured in glands
  • Balanced seal assembly
  • Full flow area
  • Matched seal faces
  • Bearing isolation system available
  • Tungsten carbide counterseat

Benefits

  • Improved reliability, increased flow area
  • Corrosion resistant
  • Reduced down-time and cost of maintenance
  • Robust design, no risk of o-ring slipping
  • Extended operating life
  • Low pressure drop
  • Materials selected for specific service
  • Increased bearing protection
  • Added toughness and shock resistance

Specifications

Max. Pressure Max. Temperature Max. Speed Fluid
1.3MPa 250°C 1,000rpm Steam/Water/Hot Oil

Single:Threaded

Dual:Threaded

Threaded:Single·Dual Flow

Unit:mm
Type Size M P S A C D F G J1 J2
4200RX 2″ 1 1/4″, 2″ 1″, 1 1/4″ 1 1/4″ 49 143 229 56 309 280 336
4250RX 2 1/2″ 2 1/2″ 1 1/4″, 1 1/2″, 2″ 1 1/2″ 61 174 271 72 371 334 402
4300RX 3″ 2″, 3″ 1 1/4″ – 2″ 1 1/2″, 2″ 74 200 327 92 453 397 491
*Dimensions are subject to change without any advanced notice.

Single:Flanged

Dual:Flanged

Flanged:Single·Dual Flow

Unit:mm
Type Size(K) タイプ M P S A B C D E F
4200RX 2″ Single 2″ – – 353 272 – 211 162 94
Dual 1″ 1″ 1 1/4″ 401 344 222 211 162 102
4250RX 2 1/2″ Single 2 1/2″ – – 397 311 – 211 162 104
Dual 1 1/2″ 1 1/2″ 1 1/2″ 487 419 262 211 162 117
4300RX 3″ Single 3″ – – 449 349 – 102 192 124
Dual 2″ 2″ 2″ 565 474 304 102 192 130
*For 2″ and 2 1/2″ sizes, the ’D’ dimension is the ID of the counterbore. Counterbore depth is 0.25″(6.4mm). For 3″ size, the ’D’ dimension is the OD of the pilot. Pilot depth 0.30″(7.6mm). Drawings show the integral flanged nipple with pilot.
*Dimensions are subject to change without any advanced notice.

Specifications

Max. Pressure Max. Temperature Max. Speed Fluid
1MPa 150°C 750rpm Water

Single:Threaded

Dual:Threaded

Threaded:Single·Dual Flow

Unit:mm
Type Size(K) Type M P S A B C D E F G
4400RX 4″ Single 4″ – – 484 415 – 120 229 168 –
Dual 2 1/2″ 2 1/2″ 2 1/2″ 530 484 334 120 229 76 111
*Counterbore depth=7.6mm
*Dimensions are subject to change without any advanced notice.

Single:Flanged

Dual:Flanged

Flanged:Single·Dual Flow

Unit:mm
Type Size(K) Type M P S A B C D E F G
4400RX 4″ Single 4″ – – 530 415 – 120 229 165 –
Dual 2 1/2″ 2 1/2″ 2 1/2″ 677 582 343 120 229 133 181
4500RX 5″ Single 5″ – – 583 485 – 160 225 194 –
Dual 3″ 3″ 3″ 756 661 428 160 225 140 212
*Counterbore depth=7.6mm
*Dimensions are subject to change without any advanced notice.

Specifications

Max. Pressure Max. Temperature Max. Speed Fluid
1MPa 250°C 750rpm Water/Hot Oil

Single:Threaded

Dual:Threaded

Threaded:Single·Dual Flow

Unit:mm
Type Size(K) Type M P S A B C D E F G
4400RX 4″ Single 4″ – – 538 469 – 120 229 168 –
Dual 2 1/2″ 2 1/2″ 2 1/2″ 582 536 386 120 229 76 111
*Counterbore depth=7.6mm
*Dimensions are subject to change without any advanced notice.

Single:Flanged

Dual:Flanged

Flanged:Single·Dual Flow

Unit:mm
Type Size(K) Type M P S A B C D E F G
4400RX 4″ Single 4″ – – 584 469 – 120 229 165 –
Dual 2 1/2″ 2 1/2″ 2 1/2″ 730 636 397 120 229 133 181
4500RX 5″ Single 5″ – – 617 486 – 160 225 194 –
Dual 3″ 3″ 3″ 757 662 428 160 225 140 212
4600RX 6″ Single 6″ – – 657 517 – 176 248 227 –
Dual 4″ 4″ 4″ 887 773 498 176 248 178 229
*Counterbore depth for 4″=7.6mm
*Counterbore depth for 5″=14.2mm
*Dimensions are subject to change without any advanced notice.

RX Rotary Joint (Size:3/8″ – 1 1/2″)

Standard Specifications

Max. Pressure Max. Temperature
1.3MPa 105°C
Max. Speed Fluid
3,500rpm Water/Air

*Consult us for RX-1, RX-2, and RX-3 unions for applications up to 450°F (232°C).

RXA：Single(Threaded)

RXB2：Dual(Threaded)

Threaded:Single·Dual Flow

Unit:mm
Type Size(K) A C D F G H J1 J2 M P S
4038RXA
4038RXB2		 3/8″ NPT 10 64 100 10 138 117 119 153 3/8″ 1/4″ 1/4″
5/8″ – 18 UNF 10 64 100 16 138 117 119 153 3/8″ 1/4″ 1/4″
3/8″ BSP 10 64 100 16 138 123 119 153 3/8″ 1/4″ M6×1″
4050RXA
4050RXB2		 1/2″ NPT 13 64 102 13 138 117 122 153 1/2″ 3/8″ 1/8″
3/4″ – 16 UNF 13 64 102 19 138 117 122 153 1/2″ 3/8″ 1/8″
1/2″ BSP 13 64 102 19 138 123 122 153 1/2″ 3/8″ 1/8″
4075RXA
4075RXB2		 3/4″ NPT 17 73 113 14 156 133 138 173 3/4″ 1/2″ 1/4″
1″ – 14 UNF 17 73 113 19 156 133 138 173 3/4″ 1/2″ 1/4″
3/4″ BSP 17 73 113 19 156 134 138 173 3/4″ 1/2″ 1/4″
4100RXA
4100RXB2		 1″ NPT 25 91 138 17 193 164 166 213 1″ 1/2″ 3/8″
1 1/2″ – 12 UNF 25 91 138 28 193 171 166 213 1″ 1/2″ 3/8″
1″ BSP 25 91 138 28 193 171 166 213 1″ 1/2″ 3/8″
4125RXA
4125RXB2		 1 1/4″ NPT 32 96 155 17 222 200 189 247 1 1/4″ 1″ 1/2″
1 3/4″ – 12 UNF 32 96 155 30 222 200 189 247 1 1/4″ 1″ 1/2″
1 1/4″ BSP 32 96 155 30 222 200 189 247 1 1/4″ 1″ 1/2″
4150RXA
4150RB2		 1 1/2″ NPT 38 116 174 17 243 206 212 268 1 1/2″ 3/4″ 3/4″
2″ – 12 UNF 38 116 182 28 250 214 220 276 1 1/2″ 3/4″ 3/4″
1 1/2″ BSP 38 116 182 28 250 214 220 276 1 1/2″ 3/4″ 3/4″
*Dimensions are subject to change without any advanced notice.
]]> Khớp nối quay LJ™ https://myviet-idi.com/vi/products/khop-noi-quay-lj/ Tue, 28 May 2024 15:00:00 +0000 https://myvietidi.ura.vn/products/khop-noi-quay-lj/ The LJ rotary joint is designed for steam service and is commonly applied to corrugating rolls, food processing dryers, and other installations where external framework is available for support. The LJ joint uses two external rods for support. It is available in either single- or dual-flow applications with a stationary syphon. Sizes range from 1” up to 8”. The steam joint is rated up to 650° F (343° C), 510 psig (35 bar), and 200 RPM.

Features

  • External rod-supported
  • Designed for steam service
  • Threaded or quick release nipple

Benefits

  • Easy installation
  • Application specific performance
  • Flexible mounting options

Type: L-JT Specifications

Fluid Usual Pressure Max. Pressure Max. Temperature Max. Speed
Steam/Water 2.0MPa 3.5MPa 343°C 200rpm
Unit:mm
Type Size(K) M A B C D F J N O
2300L-JT 1″ 3/4″ 24 48 79 79 44 143 108 – 146 13
2400L-JT 1 1/4″ 1″ 32 59 94 94 54 162 130 – 165 13
2500L-JT 1 1/2″ 1 1/4″ 38 70 114 114 64 196 184 – 206 21
*Dimensions are subject to change without any advanced notice.

Type: L-JTR Specifications

Fluid Usual Pressure Max. Pressure Max. Temperature Max. Speed
Steam/Water 2.0MPa 3.5MPa 343°C 200rpm
Unit:mm
Type Size(K) M C D F J N O
2550L-JTR 2″ 1 1/2″ 171 133 70 230 197 – 222 21
2600L-JTR 2 1/2″ 2″ 184 155 81 257 210 – 241 21
2700L-JTR 3″ 2 1/2″ 200 190 101 303 241 – 260 33
2800L-JTR 4″ 3″ – 4″ 260 257 140 403 308 – 356 33 – 40
950L-JTR 5″ 2″ – 5″ 330 294 151 454 400 – 457 54
1000L-JTR 6″ 2″ – 6″ 371 278 123 437 457 67
1075L-JTR 7 1/2″ 6″ 384 351 220 532 457 67
*Dimensions are subject to change without any advanced notice.

Type: L-JAP Specifications

Fluid Usual Pressure Max. Pressure Max. Temperature Max. Speed
Steam/Water 2.0MPa 3.5MPa 343°C 200rpm
Unit:mm
Type Size(K) M P S C D F G H J N O
2500L-JAP 1 1/2″ 1 1/4″ 3/4″ 1/2″ – 3/4″ 114 114 64 137 232 278 181 – 206 21
2550L-JAP 2″ 1 1/2″ 3/4″ 1/2″ – 3/4″ 130 116 64 – 222 279 216 21
2600L-JAP 2 1/2″ 2″ 1″ 3/4″ 140 129 70 129 234 294 210 – 235 21
2700L-JAP 3″ 2 1/2″ 1 1/4″ – 1 1/2″ 3/4″ – 1 1/4″ 157 159 86 156 287 349 235 – 260 27
*Dimensions are subject to change without any advanced notice.

Type: L-JARP Specifications

Fluid Usual Pressure Max. Pressure Max. Temperature Max. Speed
Steam/Water 2.0MPa 3.5MPa 343°C 200rpm
Unit:mm
Type Size(K) M P S C D F G H J N O
2550L-JARP 2″ 1 1/2″ 3/4″ – 1″ 1/2″ – 3/4″ 171 133 70 138 236 306 197 – 222 21 – 27
2600L-JARP 2 1/2″ 2″ 1″ 3/4″ 184 155 81 138 273 325 210 – 457 21 – 27
2700L-JARP 3″ 2 1/2″ 1 1/4″ – 1 1/2″ 3/4″ – 1 1/4″ 200 190 101 154 316 378 241 – 489 33
2750L-JARP 3 1/2″ 3″ 1 1/4″ – 1 1/2″ 1″ – 1 1/2″ 235 203 99 170 332 414 279 – 505 33
11000L-JARP 8″ 5″ – 6″ 4″ – 5″ 3″ – 5″ 432 337 146 319 579 749 559 67
*Dimensions are subject to change without any advanced notice.
]]> Khớp nối quay SX™ https://myviet-idi.com/vi/products/khop-noi-quay-sx/ Tue, 28 May 2024 14:58:27 +0000 https://myvietidi.ura.vn/products/khop-noi-quay-sx/ The self-supported SX rotary joint provides a positive seal between stationary piping and a rotating cylinder and is applied to steam, water, and hot oil service. The SX incorporates two internal carbon-graphite bearings that permit self-alignment and long operating life – even on cylinders that are not concentric. Using new sealing technologies, the SX rotary joint has extended seal life and increased reliability along with application flexibility.

The convex seal ring and optimized seal diameter provide extended seal life and reduced maintenance for the SX rotary joint. The concept of applying different seal geometries to different media (steam, water, and oil) gives the SX rotary joint a strong point of differentiation as well as a marked improvement in performance.

The SX rotary joint line is available in sizes from ¾” to 3” and can be used in single- or dual-flow applications. The joint is rated up to 650° F (343° C), 300 psig (20 bar), and 550 RPM.

Features

  • Designed for oil, water, and steam
  • Two internal support guides
  • Optimized seal diameter
  • Convex seal ring in compression
  • Maximum carbon guide separation

Benefits

  • Application flexibility
  • Increased life and reliability
  • Extended seal life, reduced maintenance
  • Self-aligning seal, longer life
  • Improved joint and syphon support

Single Flow Rotary Joint

Fluid Usual Pressure Max. Pressure Max. Temperature Max. Speed
Steam/Water 2MPa 3.5MPa 288°C 550rpm
Hot Oil 1MPa 1MPa 343°C 550rpm

Type: SXA(Q)

Unit:mm
Type Size(K) M C F G J O
3200SXA(Q) 3/4″ 3/4″ 94 51 111 184 11
3300SXA(Q) 1″ 1″ 105 46 122 195 11
3400SXA(Q) 1 1/4″ 1 1/4″ 133 51 151 232 14
3500SXA(Q) 1 1/2″ 1 1/2″ 167 56 178 267 18
3550SXA(Q) 2″ 2″ 176 57 204 302 22
3600SXA(Q) 2 1/2″ 2 1/2″ 198 67 215 320 22
3700SXA(Q) 3″ 3″ 219 76 248 389 28
Available threaded (NPT, BSPT, BSP) or “Q” Quick Release Nipple
*Dimensions are subject to change without any advanced notice.

Type: SXC(Q)

Unit:mm
Type Size(K) M C F G J O
3200SXC(Q) 3/4″ 3/4″ 94 51 81 176 11
3300SXC(Q) 1″ 1″ 105 46 84 160 11
3400SXC(Q) 1 1/4″ 1 1/4″ 133 51 99 194 14
3500SXC(Q) 1 1/2″ 1 1/2″ 167 56 121 219 18
3550SXC(Q) 2″ 2″ 176 57 130 224 22
3600SXC(Q) 2 1/2″ 2 1/2″ 198 67 138 251 22
3700SXC(Q) 3″ 3″ 219 76 160 279 28
*Available threaded (NPT,BSPT,BSP) or “Q” Quick Release Nipple
*Dimensions are subject to change without any advanced notice.

Dual Flow Rotary Joint

Fluid Usual Pressure Max. Pressure Max. Temperature Max. Speed
Steam/Water 2MPa 3.5MPa 288°C 550rpm
Hot Oil 1MPa 1MPa 343°C 550rpm

Type: SXB(Q)

Unit:mm
Type Size(K) M P S C D E F G H J O
3200SXB(Q) 3/4″ 1/2″ 1/2″ 1/8″ – 1/4″ 94 19 33 51 116 152 200 11
3300SXB(Q) 1″ 3/4″ 1/2″ 1/4″ – 3/8″ 105 28 35 46 127 171 227 11
3400SXB(Q) 1 1/4″ 1″ 1/2″ 3/8″ – 1/2″ 133 35 46 51 165 197 265 14
3500SXB(Q) 1 1/2″ 1 1/4″ 3/4″ 1/2″ – 3/4″ 167 37 44 56 181 226 279 18
3550SXB(Q) 2″ 1 1/2″ 3/4″ 1/2″ – 3/4″ 176 38 48 57 197 241 312 22
3600SXB(Q) 2 1/2″ 2″ 1″ 3/4″ – 1″ 198 38 52 67 210 262 345 22
3700SXB(Q) 3″ 2″ – 2 1/2″ 1 1/4″ – 1 1/2″ 3/4″ – 1 1/2″ 219 73 90 76 265 305 423 28
*Available threaded (NPT, BSPT, BSP) or “Q”” Quick Release Nipple
*Dimensions are subject to change without any advanced notice.

Type: SXBP(Q)・SXBP(Q)-1
(SXBP(Q)-1 has the split wedge and pressure plate device for reduced syphon pipe breakage.)

Unit:mm
Type Size(K) M P S C D E F G H J O
3300SXBP(Q) 1″ 3/4″ 1/2″ 1/4″ – 3/8″ 105 28 35 46 147 178 247 11
3400SXBP(Q) 1 1/4″ 1″ 1/2″ 3/8″ – 1/2″ 133 35 46 51 181 206 282 14
3500SXBP(Q) 1 1/2″ 1 1/4″ 3/4″ 1/2″ – 3/4″ 167 37 44 56 198 241 298 18
3550SXBP(Q) 2″ 1 1/2″ 3/4″ 1/2″ – 3/4″ 176 38 48 57 214 257 329 22
3600SXBP(Q) 2 1/2″ 2″ 1″ 3/4″ – 1″ 198 38 52 67 226 279 363 22
3700SXBP(Q) 3″ 2″ – 2 1/2″ 1 1/4″ – 1 1/2″ 3/4″ – 1 1/2″ 219 73 90 76 280 322 439 28
*Available threaded (NPT, BSPT, BSP) or “Q” Quick Release Nipple
*Dimensions are subject to change without any advanced notice.

Type: SXB2(Q)

Unit:mm
Type Size(K) M P S C D E F G H J O
3200SXB2(Q) 3/4″ 1/2″ 3/8″ 1/8″ 94 24 33 51 116 157 189 11
3300SXB2(Q) 1″ 3/4″ 1/2″ 1/4″ – 3/8″ 105 27 35 46 125 162 195 11
3400SXB2(Q) 1 1/4″ 1″ 1/2″ 3/8″ 133 – 40 51 165 214 234 14
*Available threaded (NPT, BSPT, BSP) or “Q” Quick Release Nipple
*Dimensions are subject to change without any advanced notice.

Type: SXD(Q)

Unit:mm
Type Size(K) M P S C D E F G H J O
3500SXD(Q) 1 1/2″ 1 1/4″ 3/4″ 1/2″ – 3/4″ 167 174 44 56 57 281 322 18
3550SXD(Q) 2″ 1 1/2″ 3/4″ 1/2″ – 3/4″ 176 188 48 57 60 285 336 22
3600SXD(Q) 2 1/2″ 2″ 1″ 3/4″ 198 209 52 67 61 335 383 22
3700SXD(Q) 3″ 2 1/2″ 1 1/4″ – 1 1/2″ 1″ – 1 1/2″ 219 241 60 76 89 376 442 28
*Available threaded (NPT, BSPT, BSP) or “Q” Quick Release Nipple
*Dimensions are subject to change without any advanced notice.

Type: SXDP(Q)

Unit:mm
Type Size(K) M P S C D E F G H J O
3500SXDP(Q) 1 1/2″ 1 1/4″ 3/4″ 1/2″ – 3/4″ 167 198 44 56 57 300 339 18
3550SXDP(Q) 2″ 1 1/2″ 3/4″ 1/2″ – 3/4″ 176 205 48 57 60 302 353 22
3600SXDP(Q) 2 1/2″ 2″ 1″ 3/4″ 198 224 52 68 61 338 383 22
3700SXDP(Q) 3″ 2 1/2″ 1 1/4″ – 1 1/2″ 1″ – 1 1/2″ 219 258 60 76 89 392 459 28
*Dimensions are subject to change without any advanced notice.

SX Rotary Joint Cartridge

The SX cartridge is an economical and easy upgrade for users of Type S rotary joints. The cartridge includes all of the features and benefits of the SX rotary joint, less the head. Because you are able to re-use your existing head, flexible hoses, and syphon equipment, the SX cartridge requires no piping modifications and offers extended seal life, reduced maintenance, and improved joint and syphon support. The SX cartridge is available in sizes from ¾” to 3”.

Features

  • Same connection locations as type S Joint
  • Fits existing type S Joint heads
  • Two internal support guides
  • Optimized seal diameter
  • Convex seal ring in compression
  • Maximum carbon guide separation

Benefits

  • No piping modifications, easy upgrade
  • Low cost upgrade
  • Increased life and reliability
  • Extended seal life, reduced maintenance
  • Self-aligning seal, longer life
  • Improved joint and syphon support
]]> Khớp nối quay SN™ https://myviet-idi.com/vi/products/khop-noi-quay-sn/ Tue, 28 May 2024 14:54:02 +0000 https://myvietidi.ura.vn/products/khop-noi-quay-sn/ The SN rotary joint is designed for steam service and rotating syphon pipes. The self-supporting design has a single internal carbon-graphite guide bearing. The rotary joint is available in sizes from ¾” to 5” and is rated up to 650° F (343° C), 510 psig (35 bar), and 100 RPM.

Features

  • Large carbon bearing
  • Minimal number of components
  • Threaded or quick release nipple

Benefits

  • Enhanced support
  • Reduced inventory, easy to repair
  • Installation flexibility

Type: S-NH (Dual Flow)

Fluid Max. Pressure Max. Temperature Max. Speed
Water/Steam 3.5MPa 260°C 100rpm
Unit:mm
Type Size(K) M P S A C
2200S-NH(Q) 3/4″ 1/2″ 1/2″ 1/8″ – 1/4″ 196.1 108.0
2300S-NH(Q) 1″ 1/2″ – 3/4″ 1/2″ – 3/4″ 1/4″ – 3/8″ 231.8 115.8
2400S-NH(Q) 1 1/4″ 1/2″ – 1″ 1/2″ – 1″ 3/8″ – 1/2″ 258.8 144.5
2500S-NH(Q) 1 1/2″ 3/4″ – 1 1/4″ 3/4″ – 1 1/4″ 1/2″ – 3/4″ 296.9 168.1
2600S-NH(Q) 2 1/2″ 1 1/4″ – 2″ 1 1/4″ – 1 1/2″ 3/4″ – 1 1/4″ 350.8 173.5
2700S-NH(Q) 3″ 1 1/4″ – 2″ 1″ – 1 1/2″ 3/4″ – 1 1/2″ 360.4 185.4
2750S-NH(Q) 3 1/2″ 1 1/2″ – 2″ 1 1/2″ – 2″ 1 1/2″ – 2″ 423.9 254.0
2800S-NH(Q) 4″ 2″ – 2 1/2″ 2″ – 2 1/2″ 2″ – 2 1/2″ 504.8 279.4
2950S-NH(Q) 5″ 3″ 3″ 3″ 614.9 307.8
*Dimensions are subject to change without any advanced notice.
]]> Rotary Syphon https://myviet-idi.com/vi/products/rotary-syphon/ Sun, 19 May 2024 14:22:37 +0000 https://myvietidi.ura.vn/products/rotary-syphon/ Kadant Johnson rotary syphons are fixed to the inside of the cylinder by applying tension to spring and rotate with the cylinder. Because the rotary syphon moves with the rotating cylinder, it can be placed closer to the cylinder shell. In result, improved heat transfer, reduced drive load and corrected moisture profile are expected, reducing the level of condensate inside the cylinder.

Applied syphon size: 1/2″ – 1 1/4″

For syphon sizing, proper syphon size is determined based on steam pressure, condensing rate and differential pressure.

We could recommend the optimum syphon selection upon receipt of the required information from you.

Features

  • Provided excellent removing condensate from cylinder
  • Higher temperature profile for cross machine direction
  • Reduced the level of condensate inside the cylinder
  • Reduced drive load
  • Reduced maintenance

]]> Xi phông Pivot Body™ https://myviet-idi.com/vi/products/xi-phong-pivot-body/ Sun, 19 May 2024 14:21:42 +0000 https://myvietidi.ura.vn/products/xi-phong-pivot-body/ The Pivot Body syphon elbow allows a syphon pipe to be inserted into a dryer through the dryer journal, without the need for a hand hole or manhole. Unlike conventional syphon elbows, the Pivot Body syphon elbow does not rely on a hinge pin to hold vertical and horizontal bodies together. Its unique pinless design provides improved performance, increased reliability, and easier installation.

Features

  • Unique pivot body design
  • Stainless steel construction
  • Sealed pipe connections
  • Shorter length syphon pipe

Benefits

  • Longer operating life
  • Corrosion resistant materials
  • Eliminates leakage, reduced dryer flooding
  • Reduced load on rotary joint supports

The Kadant Johnson Pivot Body syphon elbow design consists of three major parts: horizontal body, pivot body, and standard EPR O-ring. Both body components are made of stainless steel. There are three sizes available:

Vertical Leg Horizontal Leg
Rc 3/8″ Rc 1/2″
Rc 1/2″ Rc 3/4″
Rc 3/4″ Rc 1″

Note that the horizontal pipe and vertical pipe are not the same size. The vertical pipe is one pipe size smaller. The smaller vertical leg limits blow-through steam and reduces the cantilevered weight of the syphon assembly. In turn, this reduces the stress on the pipe threads securing the horizontal pipe into the head of the rotary joint.

]]>