Rotary Syphon
Kadant Johnson rotary syphons are fixed to the inside of the cylinder by applying tension to spring and rotate with the cylinder. Because the rotary syphon moves with the rotating cylinder, it can be placed closer to the cylinder shell. In result, improved heat transfer, reduced drive load and corrected moisture profile are expected, reducing the level of condensate inside the cylinder.
Applied syphon size: 1/2″ – 1 1/4″
For syphon sizing, proper syphon size is determined based on steam pressure, condensing rate and differential pressure.
We could recommend the optimum syphon selection upon receipt of the required information from you.
Features
- Provided excellent removing condensate from cylinder
- Higher temperature profile for cross machine direction
- Reduced the level of condensate inside the cylinder
- Reduced drive load
- Reduced maintenance
Related products
Designed specifically for non-rimming cylinders, the Kadant Johnson rotary scoop syphon is pre-assembled at the factory for fast and easy installation. Its stainless steel components provide maximum corrosion resistance and offer reliable condensate evacuation for machine speeds up to 275 mpm (900 fpm). Features Stainless steel scoop Low clearance syphon gap No grinding of scoop required Syphon pipe exits back of scoop. Stainless steel piping Reduced weight Pipe connection...
Kadant Johnson rotary syphons are fixed to the inside of the cylinder by applying tension to spring and rotate with the cylinder. Because the rotary syphon moves with the rotating cylinder, it can be placed closer to the cylinder shell. In result, improved heat transfer, reduced drive load and corrected moisture profile are expected, reducing the level of condensate inside the cylinder. Applied syphon size: 1/2″ – 1 1/4″...
The Pivot Body syphon elbow allows a syphon pipe to be inserted into a dryer through the dryer journal, without the need for a hand hole or manhole. Unlike conventional syphon elbows, the Pivot Body syphon elbow does not rely on a hinge pin to hold vertical and horizontal bodies together. Its unique pinless design provides improved performance, increased reliability, and easier installation. Features Unique pivot body design Stainless...
Locking Elbow (US Patent No.7,618,068) The Kadant Johnson locking elbow is the first 45° syphon elbow designed exclusively for high speed, small roll diameter applications. The stainless steel horizontal leg is secured to the vertical leg using a proprietary locking mechanism. This robust syphon elbow provides maximum reliability and performance. As an integral component of the steam joint, the locking elbow is the most maintenance-free and reliable syphon elbow...
Kadant Johnson syphon elbow allows the condensate inside the cylinder to remove, dropping down to the bottom of the cylinder at the angle of 60 degrees from the hinge by rotating 180 degrees around in the operating position (Syphon Elbow is as straight as a line when being inserted.), and sealing valve under the syphon pipe’s own weight. This syphon elbow allows very easy installation and more cost efficiency....
With more than 20,000 cantilever stationary syphons sold, Kadant is the preferred supplier and a global leader in stationary syphon technology. Our cantilever stationary syphons are designed for use on paper machine dryer sections running up to 2,000 mpm (6,500 fpm) and engineered to integrate with dryer drainage system and system components. Features Stainless steel clamp pad with Teflon shoe Optimized profile with low drag Large syphon tip opening...