Nippon Joint, Ltd. là nhà sản xuất và phân phối khớp nối quay và ống Xi-phông tại Nhật Bản theo thỏa thuận hợp tác Kỹ thuật với Kadant Johnson Inc. Hoa Kỳ. Các sản phẩm của KADANT được sản xuất bởi Nippont Joint đáp ứng tất cả các tiêu chuẩn chất lượng của KADANT và được dán nhãn KADANT."
Công ty Mỹ Việt là đại lý độc quyền phân phối các sản phẩm của Nippon Joint/Kadant Johnson cho thị trường Việt Nam.
The RX rotary joint uses a balanced seal with special ball bearing or optional tapered roller bearings to support the rotor. This rotary joint from Kadant Johnson incorporates the latest technology in mechanical seal design for water and hot oil service. The high thrust load capability and carbon-to-silicon (or Tungsten) carbide seal package makes the RX run longer and with less maintenance requirements that other ball bearing designs. All...
The LJ rotary joint is designed for steam service and is commonly applied to corrugating rolls, food processing dryers, and other installations where external framework is available for support. The LJ joint uses two external rods for support. It is available in either single- or dual-flow applications with a stationary syphon. Sizes range from 1” up to 8”. The steam joint is rated up to 650° F (343° C),...
The self-supported SX rotary joint provides a positive seal between stationary piping and a rotating cylinder and is applied to steam, water, and hot oil service. The SX incorporates two internal carbon-graphite bearings that permit self-alignment and long operating life – even on cylinders that are not concentric. Using new sealing technologies, the SX rotary joint has extended seal life and increased reliability along with application flexibility. The convex...
The SN rotary joint is designed for steam service and rotating syphon pipes. The self-supporting design has a single internal carbon-graphite guide bearing. The rotary joint is available in sizes from ¾” to 5” and is rated up to 650° F (343° C), 510 psig (35 bar), and 100 RPM. Features Large carbon bearing Minimal number of components Threaded or quick release nipple Benefits Enhanced support Reduced inventory, easy...
EL-IC Rotary Joints and ECM Stationary Syphons are developed for open gear paper machines operating at high speeds, and could provide stable dryer performance for extended period. They could improve insufficient condensate removal and moisture profile for manufacturing of a wide variety of products in small quantities. Specifications Max. Pressure Max. Temperature Max. Machine Speed 1.0MPa 200°C 800m/min Features Balanced Seal Technology and double-guide support for extended operating life...
The ELS (Extended Life Series) rotary joint is a self-supported joint that has been specifically designed to solve accelerated wear problems that occur with conventional self-supported rotary joints – particularly those in high vibration applications. The double-guide design provides internal support for the joint and maintains alignment even when the roll or cylinder is not concentric. The ELS is available in single-flow or with stationary syphon dual-flow configurations for...
The LN rotary joint is designed for steam service and is commonly applied to paper dryers, synthetic fiber rolls, food processing dryers, and other installations where external framework is available for support. Using two external rods for support, the LN is available in either single- or dual-flow applications with a rotating syphon pipe. Sizes range from 1/2” to 8” and the steam joint is rated up to 650° F...
The PTX rotary joint and stationary syphon system incorporate the latest developments in seal design and drying technology for paper dryers. The lightweight design makes for easy installation; yet its heavy-duty construction handles high pressure, high speed, and angular misalignment. The PTX can also accommodate thermal expansion of the dryer journal – even when used on the front side of paper machines. The patented PTX steam joint design uses...