Khớp nối quay LN™
The LN rotary joint is designed for steam service and is commonly applied to paper dryers, synthetic fiber rolls, food processing dryers, and other installations where external framework is available for support. Using two external rods for support, the LN is available in either single- or dual-flow applications with a rotating syphon pipe. Sizes range from 1/2” to 8” and the steam joint is rated up to 650° F (343° C), 510 psig (35 bar), and 200 RPM.
Features
- Designed for steam service
- Renewable wear plate
- External rod-supported
Benefits
- Application specific
- Lower maintenance and repair cost
- Easy installation
Type: L-NAR Specifications
 |
Fluid | Usual Pressure | Max. Pressure | Max. Temperature | Max. Speed |
|---|---|---|---|---|---|
| Steam/Water | 2.0MPa | 3.5MPa | 288°C | 550rpm |
Type: L-NARQ型
Unit:mm
| Type | Size(K) | M | P | S | C | D | F | G | H | J | N | O | Support rod size |
||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Reg. | Min. | MaX. | |||||||||||||
| 2550L-NARQ | 2″ | 1 1/2″ | 1″ – 1 1/4″ | 1/2″ – 1″ | 172 | 134 | 70 | 132 | 250 | 299 | 197 | 197 | 222 | 20 | 19 |
| 2550L4-NARQ | 2″ | 1 1/2″ | 1″ – 1 1/4″ | 1/2″ – 1″ | 172 | 134 | 70 | 132 | 250 | 299 | 197 | 197 | 336 | 20 | 19 |
| 2550L6-NARQ | 2″ | 1 1/2″ | 1″ – 1 1/4″ | 1/2″ – 1″ | 172 | 134 | 70 | 132 | 250 | 299 | 197 | 197 | 394 | 20 | 19 |
| 2600L-NARQ | 2 1/2″ | 2″ | 1″ – 1 1/4″ | 1/2″ – 1 1/4″ | 184 | 150 | 74 | 140 | 270 | 324 | 210 | 210 | 241 | 20 | 19 |
| 2600L4-NARQ | 2 1/2″ | 2″ | 1″ – 1 1/4″ | 1/2″ – 1 1/4″ | 184 | 150 | 74 | 140 | 270 | 324 | 210 | 210 | 349 | 20 | 19 |
| 2600L8-NARQ | 2 1/2″ | 2″ | 1″ – 1 1/4″ | 1/2″ – 1 1/4″ | 184 | 150 | 74 | 140 | 270 | 324 | 210 | 210 | 486 | 20 | 19 |
| 2600L11-NARQ | 2 1/2″ | 2″ | 1″ – 1 1/4″ | 1/2″ – 1 1/4″ | 184 | 150 | 74 | 140 | 270 | 324 | 210 | 210 | 530 | 20 | 19 |
| 2700L-NARQ | 3″ | 2 1/2″ | 1″ – 1 1/2″ | 3/4″ – 1 1/2″ | 200 | 179 | 90 | 158 | 305 | 374 | 241 | 235 | 260 | 26 | 25 |
| 2700L4-NARQ | 3″ | 2 1/2″ | 1″ – 1 1/2″ | 3/4″ – 1 1/2″ | 200 | 179 | 90 | 158 | 305 | 374 | 241 | 235 | 375 | 26 | 25 |
| 2700L6-NARQ | 3″ | 2 1/2″ | 1″ – 1 1/2″ | 3/4″ – 1 1/2″ | 200 | 179 | 90 | 158 | 305 | 374 | 241 | 235 | 489 | 26 | 25 |
| 2750L-NARQ | 3 1/2″ | 3″ | 1 1/4″ – 2″ | 3/4″ – 1 1/2″ | 235 | 206 | 95 | 171 | 340 | 420 | 280 | 280 | 333 | 34 | 32 |
| 2750L4-NARQ | 3 1/2″ | 3″ | 1 1/4″ – 2″ | 3/4″ – 1 1/2″ | 235 | 206 | 95 | 171 | 340 | 420 | 280 | 280 | 495 | 34 | 32 |
| 2800L-NARQ | 4″ | 4″ | 1 1/2″ – 2″ | 1″ – 2″ | 260 | 260 | 146 | 189 | 415 | 494 | 308 | 283 | 356 | 34 | 32 |
| 950L7-NARQ | 5″ | 2″ – 5″ | 2″ – 3″ | 1 1/4″ – 3″ | 330 | 297 | 160 | 221 | 470 | 586 | 457 | 457 | 457 | 54 | 50 |
*Dimensions are subject to change without any advanced notice.
Type:L-NAFRQ
Unit:mm
| Type | Size(K) | M | P | S | B | C | D | E | F | G | H | J | L | R | T | U | N | O | Support rod size |
||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Reg. | Min. | MaX. | |||||||||||||||||||
| 2600L-NAFRQ | 2 1/2″ | 2″ | 1 1/4″ | 1/2″ – 1 1/4″ |
133 | 184 | 76 | 133 | 74 | 160 | 270 | 378 | 68 | 40 | 91 | 35 | 210 | 210 | 241 | 20 | 19 |
| 2600L4-NAFRQ | 2 1/2″ | 2″ | 1 1/4″ | 1/2″ – 1 1/4″ |
133 | 184 | 76 | 133 | 74 | 160 | 270 | 378 | 68 | 40 | 79 | 41 | 210 | 210 | 349 | 20 | 19 |
| 2700L-NAFRQ | 3″ | 2 1/2″ | 1 1/4″ – 1 1/2″ |
3/4″ – 1 1/2″ |
152 | 200 | 89 | 152 | 90 | 186 | 305 | 432 434 |
68 70 |
29 | 97 | 44 | 241 | 235 | 260 | 26 | 25 |
| 2700L4-NAFRQ | 3″ | 2 1/2″ | 1 1/4″ – 1 1/2″ |
3/4″ – 1 1/2″ |
152 | 200 | 89 | 152 | 90 | 186 | 305 | 432 434 |
68 70 |
29 | 97 | 44 | 241 | 235 | 375 | 26 | 25 |
| 2700L8-NAFRQ | 3″ | 2 1/2″ | 1 1/4″ – 1 1/2″ |
3/4″ – 1 1/2″ |
152 | 200 | 89 | 152 | 90 | 186 | 305 | 432 434 |
68 70 |
29 | 97 | 44 | 241 | 235 | 489 | 26 | 25 |
| 2750L-NAFRQ | 3 1/2″ | 3″ | 1 1/4″ – 1 1/2″ |
3/4″ – 1 1/2″ |
180 | 235 | 111 | 180 | 95 | 198 | 340 | 472 474 |
68 70 |
36 | 125 | 46 | 280 | 280 | 333 | 34 | 32 |
| 2750L7-NAFRQ | 3 1/2″ | 3″ | 1 1/4″ – 1 1/2″ |
3/4″ – 1 1/2″ |
180 | 235 | 111 | 180 | 95 | 198 | 340 | 472 474 |
68 70 |
36 | 125 | 46 | 280 | 280 | 495 | 34 | 32 |
| 2800L-NAFRQ | 4″ | 4″ | 1 1/2″ – 2″ |
1″ – 2″ | 190 | 260 | 114 | 190 | 146 | 230 | 415 | 560 568 |
70 78 |
57 | 148 | 44 | 308 | 283 | 356 | 34 | 32 |
*Dimensions are subject to change without any advanced notice.
Related products
The RX rotary joint uses a balanced seal with special ball bearing or optional tapered roller bearings to support the rotor. This rotary joint from Kadant Johnson incorporates the latest technology in mechanical seal design for water and hot oil service. The high thrust load capability and carbon-to-silicon (or Tungsten) carbide seal package makes the RX run longer and with less maintenance requirements that other ball bearing designs. All...
The LJ rotary joint is designed for steam service and is commonly applied to corrugating rolls, food processing dryers, and other installations where external framework is available for support. The LJ joint uses two external rods for support. It is available in either single- or dual-flow applications with a stationary syphon. Sizes range from 1” up to 8”. The steam joint is rated up to 650° F (343° C),...